RJ6970AAC charging pile Interoperability Tester
RJ6970A AC charging pile Interoperability Tester is based on STM series MCU as the core and adopts the direct sampling and intelligent discrimination technology and uses LED LCD display, simple and quick keystrokes, and at the same time, has the functions of serial communication, parameter alarm, and fault simulation. It can accurately measure the parameters during the testing process of AC charging spot, and can also perform fault simulation of AC charging piles can also be performed according to the requirements of the national standard.
Main feature
Electricity parameter over limit alarm function, meeting the needs of rapid identification of abnormal products on site
Various different fault simulations are performed to test the charging pile according to the national standard requirements
RS232 or RS485 serial communication port for easy test automation and data transfer
Optional remote control port (I/O)function, realizing alarm signal output
Technical parameter
| Model | RJ6970A |
| Measuring channel | Single-phase |
| Measured parameters | AC voltage, AC current, CP voltage, CC resistance, PWM duty cycle |
| Voltage accuracy range | AC：20.0V~300.0V |
| Voltage Measurement Accuracy | AC：±(0.1%rdg.+0.1%f.s.) |
| Current accuracy range | AC：2.0A~38.0A |
| Current Measurement Accuracy | AC：±（0.5%rdg.+2dgt.） |
| CP Voltage Accuracy Range | DC：3.0V~14.0V |
| CP Voltage Measurement Accuracy | DC：±（0.5%rdg.+2dgt.） |
| CC resistance accuracy range | 100.0Ω~3600Ω |
| CC resistance measurement accuracy | ±3%rdg. |
| PWM Accuracy Range | 0.0%~100.0% |
| PWM measurement accuracy | ±0.5% |
| Control Interface | Switching function (optional) |
| Operating Environment | 0℃~40℃,20%RH~75%RH |
| Power Supply | AC 220V，50/60Hz |
| Net weight | 5kg |
| Dimensions | 440mm×88mm×370mm(W×H×D)without foot, foot height 15mm |
| Attachment | 1 instruction manual, 1 power cord (1.5 meters), 1 communication cable (1.5 meters),1 wiring terminal |
